Fitting instructions vary depending on the type of blind required. The fitting instructions for each type of blind can be downloaded by clicking on the link to the right hand side of the type of blind.

Also, the below steps will hlp you as fitting your new blind is quite straightforward. Follow our simple steps.

1. Gather your tools and unpack your blind. Inside you'll find all the fixtures and fittings that you'll need, as well as a more comprehensive set of instructions. You can download these instructions here too.

2. Decide where you want your blind to be positioned and mark out your drill holes. In most cases you'll only need to drill 2 holes at either end of the blind. Usually these should be positioned about 15cm from the end of the blind. Wider blinds will need more holes drilling - you will need to refer to the instructions.
 
3. Drill your holes and then screw the brackets into place. You'll also be provided with rawl plugs, should you need to use them.

4. Fit your blind into the brackets. It really is that easy!

The downloadable fitting and measuring instructions available below require Adobe Reader. If you do not have Adobe reader installed on your PC please click on this link to download the reader : ‘Download Adobe Reader’

How to fit vertical blinds
How to fit venetian blinds
How to fit roller blinds
How to fit roman blinds
How to fit Roman blinds with a deluxe headrail
How to fit pleated blinds
How to fit wooden blinds
How to fit natural wooden venetian blinds
How to fit woodweave blinds
How to fit skylight window blinds
How to fit child safety devices